Unplugged it, did a hard reset, unplugged it again, and everything was fine. This article is need of a clean-up. The image was taken after I successfully flashed a new firmware. Go have a beer. Opening the router may void your warranty. If in doubt leave this page now. CFE save command s. 
| Uploader: | Malagor |
| Date Added: | 7 October 2007 |
| File Size: | 38.77 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 71863 |
| Price: | Free* [*Free Regsitration Required] |
Here are the major steps.
Linksys WRT54G v2.2
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. I suspect that the initial error was caused because I hadn't explicitly reset to factory defaults I assumed that the just-out-of-the-box router would already be at default.
And this was really necessary. Done Probing Flash at Flash Window: Don't know why the dude above thinks there is a problem with memory.
WikiDevi:Network/Bootloader Collection Project - WikiDevi
Use arp -d 'box-ip' to remove the possibly wrong relation. I wanted to contribute to the dd-wrt community in some way in appreciation of everyone's hard work. Installed cce.bin, then standard generic.
With OpenWrt I've used the following: It's connected vfe.bin power, ethernet and JTAG. It's not a complete step by step guide but I try to include all my links and resources which I used to gather the information and tools to accomplish this. There are at least two types of flash chips that are used on the v7 router.
I used the DLC5 see above. CFE is the bootloader of the device You can get the source from the broadcom site Communications Processors Downloads.
Changing CFE defaults
But it doesn't accept the standard image. I simply followed the "right way to flash" instructions step by step. With OpenWrt type this:.
It goes on J1 for the wrt54g v4 and GL versions and not J2 as shown in the document. The instructions from the Tomato upgrade instructions are confirmed to work with Backfire The resulting file should be K in size for a cfe.
Also see this page: See also the forum relative teme.
Yea, it was very late last at night. I followed this forum thread Broadcom BCM support?
Anybody have a list of things to do to pinpoint the problem? Then uploaded latest stable version without issue. Flashed back to mini generic and everything works as advertised. I reread the flash procedure here and used the '30 second reset' with the button instead of the Web GUI cfe.binn it fixed my problem.
The link is ftp: This article assumes the device and is a broadcom based unit. Normally a flashing power led means, that the bootloader is running and will boot the firmware soon. I found this workaround in the forums and it fixed the drt54g.
wrt54g v8 needed [Archive] - USB JTAG
You can hit Ctrl-C to stop the utility. I can confirm the previous comments about the only deviation from the main instructions being the aberration after pressing the "continue" button with version 1. Thats why the led is shining orange constantly.
Комментарии
Отправить комментарий